A Linksys Smart router is a box that allows multiple computers, smart phones, and so on to join the same network. From there, the Linksys Smart router is usually connected to a modem so as to supply an online connection to any device that’s connected to the router. This guide aims to assist you through the primary time setup process for your Linksys smart router. In the box you may have some of the following:-
1. The router’s power supply or charger.
2. Device manual.
3. Driver disc (for some models).
4. USB cable (for some models).
5. Network cable (for some models).
1. Connect Power:-
1. Locate the facility cable and connect it to an influence source like an outlet or surge suppressor.
2. They are Plug the other end of the power cable to the Linksys smart router’s power input, which is typically located in the rear.
3. Your router should power on.
2 Connect to Modem by Cable/Wire:-
Your router must be connected to a modem so as to supply the local network with an online connection.
1. Acquire an Ethernet cable.
2. Take one end of the cable and plug it into the Internet (or WAN) port on the rear of your Linksys Smart router. The port may be blue or grey.
3. Take one end of the cable as well as plug it into an available Ethernet (or LAN) port on the rear of your modem. These ports are typically yellow.
4. Usually this is all that is needed to connect your router to a wired connection.
1. Open a new web browser. (Internet Explorer, Google Chrome, Mozilla Firefox etc.)
2. Within the address bar, type 192.168.1.1 then press Enter on the keyboard.
3. You will be asked to enter the router’s username and password to log in.
4. In the event that you can’t access the Linksys smart router’s web-based setup page, you’ve forgotten the network’s wireless security key or you are troubleshooting a connectivity issue, as well as you may need to reset the router to its default factory settings.
4 Select Password:-
Wherever possible, as well as you ought to pick a password that’s impossible to guess and is additionally immune to brute-force attacks. Password Dos and Don’ts:-
1. Passwords should be long, as well 8-12 characters or more.
2. Passwords should be something easy for you to recollect, but hard for others to guess or lookup.
3. Passwords should have lots of different character types: upper and lower case letters, numbers, and symbols.
4. Replacing letters with symbols is a simple way to achieve this: use @ for a, and (for c, as example.
5. Passwords are personal, most services have a way to create a ‘linked’ account or share services with trusted friends and family.
6. Change passwords regularly. Hence every 90 to 180 days; this helps keep your accounts from being compromised long-term.
7. If you want to write down a password or make note of it, do so only in specially designed programs, or keep and hold the physical copies with an equivalent care and respect you’d a Social Security card or certificate . Remember; anyone with your password “is you”.
1. Don’t use short passwords; computers can guess them very easily.
2. Don’t use a common word you can find in a dictionary.
3. Don’t use information which will be searched or guessed, like a birthday, anniversary, or pet’s name.
4. Don’t use the same password for everything. If one password is compromised, all of an equivalent ones are compromised across all of your accounts.
5. Don’t share passwords. As well as People together with your password “are you” to a computing system, or a service.
6. Don’t keep the same password forever. Assume that, at some point, it’ll be guessed, seen, or otherwise compromised, and as well as it must be changed.
7. Don’t write down passwords in the open, or save them in non-encrypted files on your computer.
5 Change SSID and Password:-
1. Once you log in, select Configuration.
2. Then on the upper left-hand corner look for Wi-FI. They click on Wi-Fi then Wi-Fi Settings.
3. Enter your new network name in the Wi-Fi Name field.
4. On the Security Mode field, select WPA2 Personal.
5. Enter your new password within the Password field.
6. The new username and password won’t be activated on the router until you save or confirm the change.
7. You will see a confirmation window appear briefly to confirm the change was made successfully.